Browse Categories
 
   HOT DEALS !

   Looking for used or refurbished 
   equipment or reduced-price new 
   products? See our Special Deals


 
   CALIBRATION SERVICES

For calibration and repair of your radiation detection instruments
 
 
 
   JOIN OUR MAILING LIST

 
Get the latest on new products and
special offers from JRT Associates.
 
           Join our Mailing List
 
 
   NEED HELP?
                
 
    Call JRT at 800-221-0111 
           8 am to 6 pm EST
 
 
 
 
 

PET Workstation


Price: Call JRT for Pricing
Item Number: 994-020


The PET Workstation consists of a steel table with a drawer, lower shelf, container well, and side and back shields.  The L Block must be ordered separately.

The workstation table is made of 2" (5.08 cm) steel tubing.  The sides and back walls are 2" (5.08 cm) thick lead bricks covered with steel panels on both sides.  The four corner posts are filled with lead.

The container well is 19.5" (49.5 cm) from the front of the table and has 2.5" (6.35 cm) thick lead walls for the detector chamber to be placed into.  The 2.5" (6.35 cm) leaded bottom of the container well rotates to accommodate the insertion of the detector chamber from the bottom.  The container well bottom then rotates back and is bolted in place.  The container well rises 4" (10.16 cm) above the table top and is 16" (40.64 cm) deep.  The overall diameter of the container well is 13.5" (34.29) with an inside diameter of 7" (17.8 cm).  This size container well accommodates the Capintec CRC®-15PET detector chamber.

The workstation has 4 heavy duty casters.  The two rear casters are fixed and the two front casters are swivel and locking.  Each caster is rated at 2,000 lb (909 kg).

Specifications
Overall Dimensions:  27.75" W x 35.75" L x 61" H (70.5 x 90.8 x 155 cm)
Table Top Dimensions:  23.25" W x 31.25" L x 34.75" H (59 x 79 x 88 cm)
Side/Back Wall Height:  16" (40.6 cm)
Color:  Durable tan textured polyurethane enamel paint
Approximate Weight:  2,650 lb (1205 kg)

Note:  The workstation can be manufactured to fit other dose detector chambers.  When placing an order please specify manufacturer of dose calibrator detector, model, outside diameter and height.