Alloy Melting Dispenser

Alloy Temperature Stability ± 4°F
Open Temperature Sensor, Unit Shuts Down Automatically
Temperature Displayed in Fahrenheit or Celsius
Control Panel is Removable by a Qualified Service Engineer
Insulated so Exterior Stays Cool
Easy to Clean Round Container - No Corners
Stainless Steel Corrosion-Resistant Interior and Exterior

 

The Digital Alloy Melting Dispensers has a 1.5 gallon tank that accommodates 120 pounds of alloy in the insulated stainless steel tank. This easy to clean round container has no hard to clean corners. The rugged design makes it universally ideal for clinical use. It features polished stainless steel housing, a stainless steel cover and a side mounted, easy to view control panel.

 

The Digital Temperature Controller displays alloy temperature in red LED's. The set temperature is read by pressing the "PUSH TO SET" key. The Digital Temperature Controller can maintain temperatures between 50°F to 230°F (10°C to 110°C). A wrap around heating element provides even temperatures throughout the entire unit.

 

A 6' (1.8m) AC Cord with grounded hospital grade plug is standard. The units are constructed with a heated faucet for easy alloy removal. Temperature displayed is set to Fahrenheit at the factory; however, this can be changed to Celsius by the end user. All units are single phase, 50/60 Hz.

 

Alloy Temperature Range: 50°F to 230°F (10°C to 110°C)
Temperature Accuracy: ± 4°F
High Limit Temperature: 230°F (110°C)
Electronic Switching: Triac with Zero Crossover Switching
Power Cord: 6' (1.8 m) 3 Wire, 300 Volt, SJT, with Hospital Grade Plug
Drain: Ball Valve with Hose Barb
Base: Aluminum
Environmental Conditions
  Altitude Limits: 2000 Meters
  Ambient Temperature Range: 0-40°C
  Relative Humidity Range: 75%
  Pollution Degree: 2
Interior Dimension: 7.125" Dia. x 8.625" Deep (18 x 21.9 cm)
Exterior Dimension: 10.5" Dia. x 14.5" High (26.7 x 36.8 cm)
Weight: 18 lbs (8.2 kg)

FOR INDOOR USE ONLY