CT Sim Robotic Laser Tracking Systems

The Gammex A4000A and A4100G CT Sim Robotic Laser Tracking Systems consist of two fixed side-wall lasers and one overhead laser with a movable sagittal line. The sagittal laser provides precise position in one dimension (x axis) and relies on the CT scanner couch motion for positioning in the second and third dimensions (Y and Z axes).

All vital features of the CT Sim Robotic Laser Tracking System can be controlled by a remote pendant, or by using the workstation in our PC-SYS 2 systems. The lasers accept export coordinates from the treatment planning systems, allowing easy and accurate movement for location marking.

Your choice of Probe+ red diode or ProbeG green diode lasers can be used for the fixed sidewall lasers and feature a wideview turret profile that allows mounting on angled walls.The ProbeG green laser provides enhanced contrast on various skin tones, and its unique design incorporates power stabilizing circuitry that extends diode life. The Probe+ (red) and ProbeG (green) lasers that are integrated into the A4000A and A4100G respectively provide precision optics and reliability.

Both systems feature the quick and easy hand adjustments for alignment that come with the Probe lasers and with zero drift. The software is able to read data files from any treatment planning system currently on the market and read files that may already be integrated from other CT Sim system manufacturers.

A4000A and A4100G systems include:

One moving laser (choice of red or green diode)
Two fixed side-wall lasers (choice of red or green diode)
CT Sim software package
Hand-held pendant
CT Sim alignment phantom
Software manual, calibration kit, controller box and all necessary cabling

A4000A-PC-SYS 2 and A4100G-PC-SYS 2 include:

All items listed with the A4000A and A4100G
Desktop computer
17 in flat panel LCD monitor

A4000A-CBL CT Sim CBL Robotic Laser Tracking System with (2) Probe+ Lasers

A4000A-PC-SYS2-CBL CT Sim CBL Robotic Laser Tracking System with (2) Probe + Lasers, desktop computer and LCD monitor

A4100G CT Sim G Robotic Laser Tracking System with (2) Probe-G Lasers

A4100G-PC-SYS2 CT Sim G Robotic Laser Tracking System with (2)
Probe-G Lasers, desktop computer and LCD monitor

CT Sim Robotic Laser Tracking System

SPECIFICATIONS

Laser Beam
Output Power <1.0 mW (each beam) Laser Class II
Range 3 m
Line Width <0.8 mm wide at 3.0 m Line Length 1.0 m at 3.0 m
Drift No measurable drift
Wavelength Red 6350 Å (635 nm) visible red
Wavelength Green 5320 Å (532 nm) visible green
Visibility Visible even in strong ambient light

Laser Beam Adjustment
Length of travel 70 cm
Accuracy of travel ±0.5 mm at 3.0 m
Positioning accuracy ±0.5 mm at
3.0 m

Laser Dimensions
Laser Unit (Moving) 112 x 21 x 9 cm (44 x 8.25 x 3.5 in) (HWD)
Probe+ 17.3 x 14 x 8 cm (6.8 x 5.5 x 3 in) (HWD)
ProbeG 27 x 14 x 8 cm (10.6 x 5.5 x 3 in) (HWD)
Power Module 42 x 21 x 9 cm (16.6 x 8.25 x 3.2 in) (HWD)
Voltage requirements 110/240 VAC

Certification Complies with Center for Devices and Radiological Health regulations for Class II lasers and all CE requirements. (21 CFR 1040) (IEC 60825-1) (MDD 93/42/EEC).

Warranty Lasers carry a one year warranty. Extended warranty available. Computer and peripherals carry the original manufacturer's warranty only.

Minimum Requirements - Computer Gammex CT Sim Systems have specific hardware and software requirements. For ensured compatibility, Gammex recommends the purchase of the complete CT Sim system. The CT Sim software has been validated using the computer and flat screen monitor provided with the complete system. If the Gammex supplied computer and monitor are not used, Gammex cannot guarantee software’s functionality and performance. Compatibility with user supplied computers is not warranted. Call your Gammex sales representative for more information.

CT Sim Robotic Laser Tracking Systems A4000A and A4100G

CT Sim Robotic Laser Tracking Systems
A4000A and A4100G