 |
HDR Iridium Source Holders
|
|
The high dose rate iridium source holder has a 2.2 mm opening for the catheter. A rubber O-ring secures the catheter with a uniform constricting pressure to prevent catheter movement. The calibration procedure is easy and uncomplicated, and the time required for calibration is a fraction of that required for thimble ion chamber techniques.
70010 Source Holder for HDR Iridium, 2.2 mm opening
|
|
|
| |
 |
HDR 192Ir Quality Assurance Tool
|
|
The HDR 192Ir Quality Assurance Tool performs crucial tests of 192Ir sources including source positioning within 0.3 mm, timer accuracy, and consistency of source activity. Tests can be completed in as little as 15 minutes and require no films or development procedures. Medical Physics 22(4): 435-440, 1995
70008 HDR Ir Quality Assurance Tool Insert
|
|
|
| |
 |
LDR Iridium Sources
|
|
The LDR Iridium Source Holder features a 3 mm diameter acrylic tube which extends from the top of the insert to the most active area of the HDR 1000 Plus Well Chamber. It makes one loop at the active area and extends back to the top of the insert. A collective calibration of the entire ribbon of seeds is obtained. Fourteen iridium seeds spaced one centimeter center to center fit into the active area.
70009 Source Holder for LDR Iridium Ribbons
|
|
|
| |
 |
Iridium Single LDR Seed Source Holder
|
|
The single LDR seed source holder features a 1.2 mm inner diameter tube which positions an individual iodine, palladium, iridium or gold seed at the most sensitive area of the well chamber. The smooth tube allows easy removal of the seed. This source holder can be calibrated for several iodine and palladium isotopes. Only one source holder needs to be purchased for multiple calibrations.
70016 Source Holder for Single LDR Seeds, 1.2 mm opening
|
|
|
| |
 |
Cesium Source Holder
|
|
Commonly used with manually loaded cesium sources, this source holder has a 5.0 mm diameter opening. A spacer within the source holder positions the cesium insert at the most active area of the chamber. The spacer for positioning the cesium source is removable so the insert can also be used with longer cesium sources and larger HDR 192Ir catheters.
70020 Source Holder for Cesium, 5mm opening
|
|
|
| |
 |
Cesium Remote Afterloading Source Holder
|
|
Designed for use with LDR remote after-loading treatment systems, this source holder has a 7.1 mm diameter opening. There is no spacer because the after-loading system positions the source. This insert can also be used with cobalt sources used in some LDR remote after-loading treatment systems.
70003 Source Holder for Cesium Remote Afterloading, 7.1 mm opening
|
|
|
| |
|
Iodine and Palladium Single LDR Seed
Source Holder
|
|
The single LDR seed source holder features a 1.2 mm inner diameter tube which positions an individual iodine, palladium, iridium or gold seed at the most sensitive area of the well chamber. The smooth tube allows easy removal of the seed. This source holder can be calibrated for several iodine and palladium isotopes. Only one source holder needs to be purchased for multiple calibrations.
70016 Source Holder for Single LDR Seeds, 1.2 mm opening
|
|
|
| |
 |
Iodine and Palladium LDR
Seed Batch Tool
|
|
The seed batch assay tool is designed to provide multiple seed measurements for up to 500 of the iodine or palladium seeds typically used for prostate cancer treatment. Source holder positions seeds at the most sensitive area of the HDR 1000 Plus Well Chamber. Medical Physics. 22(9):1495-1497, 1995
70022 Source Holder for LDR Seed Batch Assay
|
|
|
| |
 |
Leipzig Applicator Source Holder
|
|
The Leipzig Applicator Source Holder, when used with the HDR 1000 Plus Well Chamber and an HDR Iridium Source Holder with an ADCL calibration, creates a complete calibration system for measuring the output of the six Leipzig Applicators prior to clinical use. No additional equipment is needed to verify output measurements with published correlation factors
70031 Source Holder for Nucletron Leipzig Applicator
|
|
|
| |
 |
Syringe Holders for METASTRON® 89Sr, 153Sm, and 131I
|
|
The syringe holder provides a quick and convenient QA measurement of METASTRON® 89Sr, 153Sm, and 131I vials and most liquids in a 5 cc or 10 cc syringe. Includes one 5 cc syringe and one 10 cc syringe.
70026 Source Holder for 5.0 cc and 10.0 cc Syringes
|
|
|
| |
|
Additional HDR 1000 Plus Source Holders
|
|
70110 Source Holder for Bebig Co-60 Afterloader
70023 Source Holder for RAPID Strand® Iodine Seeds
70024 Source Holder for Mick® Cartridge
70030 Source Holder for Nucletron selectSeed
70032 Source Holder for Bard Express Seeding Cartridge
70099 Ir wire Source Holder for Linear Air Kerma Strength
|
|
|
| |
|
