Browse Categories

   Looking for used or refurbished 
   equipment or reduced-price new 
   products? See our Special Deals


For calibration and repair of your radiation detection instruments

Get the latest on new products and
special offers from JRT Associates.
           Join our Mailing List
    Call JRT at 800-221-0111 
           8 am to 6 pm EST

Pro-Dent CT mk II

Price: Call JRT for Pricing

The new Pro-Dent CT mk II phantom is a versatile quality control tool of dental Cone-Beam CT, Dental Volume Tomography (DVT) and other 3D imaging devices according to the Radiation Protection Report no 172 by SEDENTEXCT.

The phantom consists of a main PMMA cylinder that houses modules with different test objects. Thanks to this design, you can perform tests with devices with a small FOV at different positions in the 160 mm phantom.

Technical data (can be modified to customer specifications):
  • Diameter: 160mm
  • Made of PMMA (1.19 g/cm3)
  • Total length: 170mm
  • Noise / uniformity section: Uniform PMMA part of the phantom
  • Geometric distortion section: Array of 2.0 mm diameter, 3.0 mm long holes uniformly pitched at 10.0 mm intervals
  • Slice geometry section: 20 mm thick module with two pairs of aluminum ramps and empty rods in vertexes of a square for detailed evaluation of slice thickness and geometry and laser position verification
  • 5 layer modules section with modules containing
    • Linear Spread Function (LSF) PTFE / PMMA interface
    • Point Spread Function (PSF) - 0.25 mm tungsten steel wire in air
    • XY high contrast resolution (aluminum/polymer) - 1.0, 1.7, 2.0, 2.5, 2.8, 4.0, 5.0 LP/mm
    • Z high contrast resolution (aluminum/polymer) - 1.0, 1.7, 2.0, 2.5, 2.8, 4.0, 5.0 LP/mm
    • 6 low-contrast groups of 1.0, 2.0, 3.0, 4.0, 5.0, 6.0 mm rods made of: aluminum, PTFE, POM-C (delrin), PE-300, air and water emulating epoxy; background made of PMMA
    • 10 mm rods made of aluminum, PTFE, POM-C (delrin), PE-300, air and water emulating epoxy suspended in PMMA - pixel intensity / HU values samples
    • Stacked 20mm diameter contrast-to-noise discs made of aluminum, PTFE, POM-C (delrin), PE-300 and air suspended in PMMA
    • Three 5.0 mm diameter titanium rods embedded in PMMA - beam hardening artifacts
  • Positioning aids on the outside surface of the phantom
  • Test stand with spirit level for accurate placing of the phantom in the test position
  • Folding base for test stand positioning on the X-ray unit’s chair
  • Convenient, portable case for storing and transporting the phantom
  • Optional additional homogeneity disc
  • Complies with Radiation Protection no 172 report by the SEDENTEXCT, IEC 61223-3-4 and IEC 61223-3-5; CE certified

01-501 Pro-Dent CT mk II 
01-502 Pro-Dent CT mk II - additional homogenous disc

Related Products

Pro-Dent All PRO Kit
Price: Call JRT for Pricing
Pro-Dent All PRO Kit
The Pro-Dent All PRO Kit is a versatile set of phantoms and software for carrying out constancy and acceptance tests of intra-oral, OPG, CBCT, DVT and other 3D imaging devices.